| Cooling Fans with Fan Covers: |
 |
These are used for supporting the thermal management. Cooling required for the important equipments can be achieved by fitting fan housing units next to them containing these cooling fans.
Dimension: 4” and 6” |
| |
|
| Equipment Support Angels: |
 |
Provided to support the equipments either from side or from the bottom depending on the accessories. Suitable for supporting 19" Rack Mounting Equipment in 19" Enclosure. |
| |
|
| Lifting Bolts: |
|
These eye bolts are made of forged steel with load bearing capacity of 350 kgs. Four eye bolts are required for each cabinet. |
| |
|
| Base Frames: |
|
Base frames are welded steel structures used to provide rigidity. Their height of 60 mm provides additional clearance for introducing cables into the cabinets from below. |
| |
|
| Cable Channel: |
 |
Used for Orderly and Structured routing of cables, consists of mounting panel to which are fixed a number of cable loops. They help to run the cable bunches horizontally along the front or rear of the cable and branch out the connections to termination points directly above or below. |
| |
|
| Aluminium Blank Panel: |
 |
Blank 19" panels are useful for covering unused space at the front of the cabinet. They are made of 2.5 mm thick aluminium sheets and are anodized / powder coated.
Available in 1U x 19" to 10U x 19" sizes. |
| |
|
| AC Mains Distribution Box / AC Mains Distribution Box: Horizontal: |
 |
AC Mains Distribution Box :
Vertical (based on height of cabinet).
This is placed at the rear of the racks vertically.
These channels having 15A / 5A sockets with 32A MCB with 3 way terminated strip.
Useful for providing power at various heights. Depending on height upto 13 numbers of 5A/ 15A sockets can be provided.
AC Mains Distribution Box: Horizontal:
32A MCB, Indicator lamp, Six 5A / 15A sockets are provided. This is 19” Rack mountable |
| |
|
| Telescopic Slides: |
 |
They are basically used to mount the electronic equipments in 19" enclosure systems. Very essential for applications where equipments need to be drawn outside the main cabinets frequently or even for maintenance. Available in different lengths. - Dinrack make Alluminium slides with SS balls - Weight carrying capacity 20-25 Kgs
Stainless Steel Ball Bearing High Quality : Capacity : Upto 30 kgs
MS : Capacity Upto 20 kgs |
| |
|
| Nylon Legs: |
 |
Special Nylon Legs are used to elevate cabinet by around 65 mm to avoid scratches to the bottom of cabinet or floor. Weight carrying capacity will be approximately 100 kgs. |
| |
|
| Drawers: |
 |
Drawers required for storage can be mounted on 19" enclosure system.
Standard: Front Alluminium of 2.5 mm thick, rest is fabricated with CRCA sheet of 1.2 mm/1.6 mm, Pull out handles.
Mounting on 19" cabinets can be done by means of: Telescopic Slides, Chassis Runners, Support Profiles sets, Support Angles. |
| |
|
| Castor Wheels: |
 |
Useful for providing mobility to floor standing cabinets. Normally two castors with foot operated brakes and two without brakes are used. They are made of nylon. Suitable for Floor Standing Racks.
Available in medium duty (180 kgs. Max) and heavy duty (350 kgs. Max) |
| |
|
| Locks: |
|
Cam Locks:
These are Godrej locks made of steel with unique lock and key.
Dinrack Locks: Made of moulded plastic, these locks open with similar key. This is useful since with only one key all the doors can be opened.
Flush Lock:
This is a three point locking system with an exclusive key for a lock. Made of MS, black coated. |
| |
|
| Fan Module: |
 |
This helps in sending fresh air into the cabinets where there is congestion.
It contains a centrifugal impeller fan. It is available in 1U, 2 U and 3U height and 19" width.
It draws air in horizontally through 10 micron filters and expels it upwards into the cabinet. Also Available in built in Horizontal AC Power Distribution Arrangement. |
| |
|
| Shock Mounts: |
 |
Rubber moulded product with steel hardware, interfaces between cabinets and platform to absorb vibrations to some extent.Selection of type is done based on weight of the cabinet and frequency of vibrations. Available with weight carrying capacity of 10, 25, 40, 60 and 85 kgs. |
| |
|
| Captive Mounting Sets (Hardware): |
 |
Front panel captive hardware sets are required for fixing 1`9" rack equipment directly to the mounting angles in the equipment cabinets. A set consists of Clip-Nut, Retainer, Cup Washer and M6 Decorative Screw. |
| |
|
| Shelves And Support Plates: |
 |
| These steel shelves are useful in supporting non 19" style equipment in 19" cabinets: |
 |
Stationery Shelves: To be fixed directly to the Vertical rails |
|
Sliding Shelves: Are fitted with ball bearing telescopic slides-Both the types can have Ventilation slots to aid the air circulation. |
|
| |
|
| Other Accessories: |
Stabiliser: Retractable Stabilisers are meant for providing stability to cabinets having shallow depths. They prevent toppling over when heavy equipment mounted on Telescopic Slides are drawn out of the cabinet.
Coupling Set: Coupling Sets are used to join any number of cabinets. A set comprises of a Steel Plate and Fixing Hardware. Height determines the number of sets to be used for a pair of racks.
KeyBoard Tray: Keyboard trays are made in the size of 1U x 19” x 400 mm deep. Available with a MS telescopic slides
|
